BENTLY+3300/330930-040-00-05

Description

Product Name

BENTLY+3300/330930-040-00-05 mm Proximity Transducer System

Product Description

The Bently Nevada 3300/330930-040-00-05 is a crucial component of the Bently Nevada 3300 XL Proximity Transducer System, widely used in machinery protection and condition monitoring applications. This system relies on eddy current technology to precisely measure the distance between the transducer tip and the observed surface. Primarily, it is used for measuring radial vibration, axial position (thrust), and speed (with appropriate targets) of rotating machinery. The Bently Nevada 3300/330930-040-00-05 is designed for harsh industrial environments. The system is known for its accuracy and reliability. The entire 3300 XL series, including the Bently Nevada 3300/330930-040-00-05, meets worldwide regulatory requirements (such as CE, ATEX, and CSA). Specifically, the Bently 3300/330930-040-00-05 is often paired with a compatible extension cable and monitor to form a complete measurement chain. The Bently Nevada 3300/330930-040-00-05 helps detect issues before they lead to major equipment damage.

Product Parameters

• BENTLY+3300/330930-040-00-05
• Transducer Type: Proximity Transducer
• Tip Diameter: 8 mm
• Unthreaded Length: 0.4 inches (040)
• Overall Case Length: 0.0 inches (00)
• Connector Option: Miniature Coaxial Connector
• Material: Stainless Steel
• Frequency Response: 0 to 10 kHz
• Temperature Range: -51°C to +177°C (-60°F to +350°F)
• Output: Proportional to distance
• Power Supply: Typically -18 to -30 VDC
• RoHS Compliance: Compliant
• Approvals: CE, ATEX, CSA (depending on specific configuration)

Advantages and Features

• High Accuracy: Provides precise measurement of vibration and position.
• Reliability: Robust design for harsh industrial environments.
• Interchangeability: Compatible with other 3300 XL series components.
• Early Fault Detection: Enables early detection of machinery faults, preventing catastrophic failures.
• Wide Application: Versatile for monitoring various types of rotating machinery.
• Regulatory Compliance: Meets worldwide regulatory requirements.
• Easy Installation: Simple to install and configure.

Application Areas and Application Cases

• Oil and Gas: Monitoring turbines, compressors, and pumps on offshore platforms and refineries. Early detection of imbalance in a large gas turbine using the Bently Nevada 3300/330930-040-00-05 system prevents catastrophic failure, saving millions in downtime and repair costs.
• Power Generation: Monitoring steam turbines, gas turbines, and generators in power plants. A power plant uses Bently Nevada 3300/330930-040-00-05 to monitor generator shaft vibration, predicting bearing wear and enabling planned maintenance during a scheduled outage, avoiding an unexpected shutdown.
• Petrochemical: Monitoring rotating equipment in chemical plants.
• Pulp and Paper: Monitoring machinery in paper mills.
• Manufacturing: Monitoring critical machinery in manufacturing plants.
• Water Treatment: Monitoring pumps and motors in water treatment facilities.

Competitive Product Comparison

• Rockwell Automation: Offers similar vibration monitoring solutions, but Bently Nevada is generally considered the industry standard for high-end, critical machinery protection.
• SKF: Provides a range of condition monitoring products, but their proximity probe systems might not offer the same level of performance and reliability as Bently Nevada in certain demanding applications.
• Emerson: Offers machinery health monitoring solutions, however, Bently Nevada specializes solely in vibration and position measurement.

Selection Advice

• Application Requirements: Consider the specific machinery and application requirements (vibration levels, temperature, environment).
• Measurement Range: Ensure the transducer’s measurement range is suitable for the application.
• Environmental Conditions: Verify that the transducer is rated for the operating temperature and environmental conditions.
• System Compatibility: Ensure compatibility with existing monitoring systems and software.
• Approvals: Confirm that the transducer meets any required regulatory approvals (e.g., ATEX, CSA).

Precautions

• Proper Installation: Install the transducer according to the manufacturer’s instructions. Incorrect installation can lead to inaccurate readings.
• Cable Management: Use proper cable routing and shielding to minimize noise and interference.
• Calibration: Calibrate the system regularly to ensure accuracy.
• Environmental Protection: Protect the transducer from physical damage and environmental contaminants.
• Grounding: Ensure proper grounding to prevent electrical noise and potential damage.

We are your trusted partner. We offer the BENTLY 3300/330930-040-00-05 and other automation spare parts sales and technical support. Contact us for special discount prices. We are here to serve you.

BENTLY+3300/330930-040-00-05